575
Specifications of Basic I/O Units Appendix A
• Be sure to wire both terminals 3 and 4 (COM1).
• Be sure to wire both terminals 21 and 22 (+V).
• Be sure to wire both terminals 1 and 2 (+V).
CJ1W-OD261 Transistor Output Unit (Fujitsu Connectors, 64 Points,
Sinking)
Circuit Configuration
Rated Voltage 12 to 24 V DC
Operating Load Voltage Range 10.2 to 26.4 V DC
Maximum Load Current 0.3 A/point, 1.6 A/common, 6.4 A/Unit
Maximum Inrush Current 3.0 A/point, 10 ms max.
Leakage Current 0.1 mA max.
Residual Voltage 1.5 V max.
ON Response Time 0.5 ms max.
OFF Response Time 1.0 ms max.
Insulation Resistance 20 MΩ between the external terminals and the GR
terminal (100 V DC)
Dielectric Strength 1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
Number of Circuits 64 (16 points/common, 4 circuits)
Internal Current Consumption 5 V DC, 170 mA max.
Fuse None
External Power Supply 10.2 to 26.4 V DC, 50 mA min.
Weight 110 g max.
Accessories None
Output indicator
Internal circuits
to
to
to
to
To Next Page
Loading...
