Omron CJ - 08-2008 - Page 632

584
Specifications of Basic I/O Units Appendix A
CJ1W-OD262 Transistor Output Unit (MIL Connectors, 64 Points,
Sourcing)
Circuit Configuration
Rated Voltage 12 to 24 V DC
Operating Load Voltage Range 10.2 to 26.4 V DC
Maximum Load Current 0.3 A/point, 1.6 A/common, 6.4 A/Unit
Maximum Inrush Current 3.0 A/point, 10 ms max.
Leakage Current 0.1 mA max.
Residual Voltage 1.5 V max.
ON Response Time 0.5 ms max.
OFF Response Time 1.0 ms max.
Insulation Resistance 20 MΩ between the external terminals and the GR
terminal (100 V DC)
Dielectric Strength 1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
Number of Circuits 64 (16 points/common, 4 circuits)
Internal Current Consumption 170 mA max. (5 V DC)
Fuse None
External Power Supply 10.2 to 26.4 V DC, 50 mA min.
Weight 110 g max.
Accessories None
OUT15
0 V
OUT00
COM0
COM0
0 V
0 V
COM1
0 V
COM1
OUT15
OUT00
COM2
COM2
OUT15
OUT00
OUT15
OUT00
COM3
COM3
CN1 (OUT)
I/O word m
I/O word m+1
CN2 (OUT)
I/O word m+3
I/O word m+2
Internal circuits
Indicator switch
Output indicator
to
to
to
to