Omron CJ - 08-2008 - Page 696

648
PLC Setup Coding Sheets for Programming Console Appendix E
Value (hex) Instruction Error Operation
A 0000 Continue operation
8000 Stop operation
Value (hex) Minimum Cycle Time
A 0000 Cycle time not fixed
0001 Cycle time fixed: 1 ms
to to
7D00 Cycle time fixed: 32,000 ms
Value (hex) Watch Cycle Time
A 0000 Default: 1,000 ms (1 s)
8001 10 ms
to to
8FA0 40,000 ms
Value (hex) Fixed Peripheral Servicing Time
A 0000 Default (4% of the cycle time)
8000 00 ms
8001 0.1 ms
to to
80FF 25.5 ms
Value (hex) Slice Time for Peripheral Servicing
A 00 Disable Peripheral Servicing Priority Mode.
01 to FF 0.1 to 25.5 ms (in 0.1-ms increments)
Value (hex) Slice Time for Program Execution
B 00 Disable Peripheral Servicing Priority Mode.
05 to FF 5 to 255 (in 1-ms increments)
197@@@@
A
Address
208@@@@
A
Address
209@@@@
A
Address
218@@@@
A
Address
219@@@@
A
B
Address