Omron NX-EIC202 - Page 32

Related Manuals
30
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
NX-series Analog I/O
Units User's Manual for
Analog Input Units and
Analog Output Units
*1
W522 NX-AD
NX-DA
Learning how to
use NX-series
Analog Input Units
and Analog Out-
put Units
The hardware, setup methods, and
functions of the NX-series Analog Input
Units and Analog Output Units are
described.
NX-series System Units
User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX01
Learning how to
use NX-series
System Units
The hardware and functions of the
NX-series System Units are described.
NX-series Position Inter-
face Units User’s Man-
ual
W524 NX-EC0
NX-ECS
NX-PG0
Learning how to
use NX-series
Position Interface
Units
The hardware, setup methods, and
functions of the NX-series Incremental
Encoder Input Units, SSI Input Units,
and Pulse Output Unit are described.
NX-series Load Cell
Input Unit User's Manual
W565 NX-RS Learning how to
use NX-series
Load Cell Input
Unit
The hardware, setup methods, and
functions of the NX-series Load Cell
Input Unit are described.
NX-series Analog I/O
Units User’s Manual for
Temperature Input Units
and Heater Burnout
Detection Units
*2
W566 NX-TS
NX-HB
Learning how to
use NX-series
Temperature Input
Units and Heater
Burnout Detection
Units
The hardware, setup methods, and
functions of the NX-series Temperature
Input Units and Heater Burnout Detec-
tion Units are described.
IO-Link System User’s
Manual
W570 NX-ILM400
GX-ILM08C
Learning every-
thing from an intro-
duction to details
about IO-Link Sys-
tems, including
mainly software
information com-
mon to all IO-Link
masters, Support
Software operat-
ing methods, and
troubleshooting.
Provides an overview of IO-Link Sys-
tems and explains the system configu-
ration, communications specifications,
communications methods, I/O data,
parameters, models, Support Software,
and troubleshooting.
Refer to the following manuals for the
individual IO-Link Master Units for
hardware information and specifica-
tions specific to each Master Unit and a
list of the objects for each Master Unit.
• NX-series IO-Link Master Unit: W568
• GX-series IO-Link Master Unit:
W488-E1-05 or later
NX-series IO-Link Mas-
ter Unit User's Manual
W567 NX-ILM Learning how to
use an NX-series
IO-Link Master
Unit
The names and functions of the parts,
installation, wiring and a list of NX
objects of the NX-series IO-Link Master
Unit are described.
NX-series Communica-
tions Interface Units
User's Manual
W540 NX-CIF Learning how to
use NX-series
Communications
Interface Units
The hardware, setup methods, and
functions of the NX-series Communica-
tions Interface Units are described.
NX-series Safety Con-
trol Unit User’s Manual
Z930 NX-SL
NX-SI
NX-SO
Learning how to
use NX-series
Safety Control
Units
The hardware, setup methods, and
functions of the NX-series Safety Con-
trol Units are described.
NX-series Safety Con-
trol Unit Instructions
Reference Manual
Z931 NX-SL Learning about the
specifications of
instructions for the
Safety CPU Unit.
The instructions for the Safety CPU
Unit are described.
When programming, use this manual
together with the NX-series Safety
Control Unit User’s Manual (Cat. No.
Z930).
Manual name Cat. No. Model numbers Application Description