Omron NX-EIC202 - DIN Track Contact Plate

4 - 13
4 Part Names and Functions
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
4-6 DIN Track Contact Plate
4
4-6 DIN Track Contact Plate
There is a DIN Track contact plate in the section on the back of the EtherNet/IP Coupler Unit that
comes into contact with the DIN Track.
This plate is connected internally to the functional ground terminal on EtherNet/IP Coupler Unit. This
means that the functional ground terminal will be electrically connected to the DIN Track.
For details, refer to 7-2-3 Grounding the EtherNet/IP Slave Terminal on page 7-7.
DIN Track contact plate
DIN Track
contact plate
Functional ground
terminal
Connected inside the Unit.
Unit side