12 Troubleshooting
12 - 52
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
1 Connect the computer on which the Support Software is installed to the peripheral USB port on
the EtherNet/IP Coupler Unit and go online.
2 Select Troubleshooting from the Tools Menu while online. You can also click the Trouble-
shooting button in the toolbar.
The following Troubleshooting Dialog Box is displayed.
The current Controller errors are displayed on the Controller Errors Tab Page (observations and
information are not displayed).
3 In the Select the Display Target of the Controller Errors Tab Page, select the Unit for which to
reset the errors and click the Reset (Selected Units) button.
The errors in the selected NX Unit are reset.
To Next Page
Loading...
