Omron NX-EIC202 - Terminology; Term

Related Manuals
32
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
NJ/NX-series CPU Unit
Motion Control User's
Manual
W507 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about
motion control set-
tings and program-
ming concepts.
The settings and operation of the CPU
Unit and programming concepts for
motion control are described.
NY-series IPC Machine
Controller Industrial
Panel PC Hardware
User’s Manual
W557 NY532- Learning the basic
specifications of
the NY-series
Industrial Panel
PCs, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NY-series
system is provided along with the fol-
lowing information on the Industrial
Panel PC.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NY-series IPC Machine
Controller Industrial Box
PC Hardware User’s
Manual
W556 NY512- Learning the basic
specifications of
the NY-series
Industrial Box PCs,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NY-series
system is provided along with the fol-
lowing information on the Industrial Box
PC.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NY-series IPC Machine
Controller Industrial
Panel PC / Industrial
Box PC Software User’s
Manual
W558 NY532-
NY512-
Learning how to
program and set
up the Controller
functions of an
NY-series Indus-
trial PC.
The following information is provided
on NY-series Machine Automation Con-
trol Software.
• Controller operation
• Controller features
• Controller settings
• Programming based on IEC 61131-3
language specifications
NY-series IPC Machine
Controller Industrial
Panel PC / Industrial
Box PC Built-in Ether-
Net/IP
TM
Port User’s
Manual
W563 NY532-
NY512-
Using the built-in
EtherNet/IP port
on an NY-series
Industrial PC.
Information on the built-in EtherNet/IP
port is provided.
Information is provided on the basic
setup, tag data links, and other func-
tions.
NY-series Instructions
Reference Manual
W560 NY532-
NY512-
Learning detailed
specifications on
the basic instruc-
tions of an
NY-series Indus-
trial PC
The instructions in the instruction set
(IEC 61131-3 specifications) are
described.
NY-series IPC Machine
Controller Industrial
Panel PC / Industrial
Box PC Motion Control
User’s Manual
W559 NY532-
NY512-
Learning about
motion control set-
tings and program-
ming concepts of
an NY-series
Industrial PC.
The settings and operation of the Con-
troller and programming concepts for
motion control are described.
Manual name Cat. No. Model numbers Application Description