Omron NX-EIC202 - Page 372

Appendices
A - 26
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
The instance attribute IDs are given in the following table.
 Values of Capability Bits
Attribute IDs
Attribute ID
(hex)
Parameter name Description Attribute Data type Value (hex)
01 Interface Speed Interface communi-
cations speed
Read UDINT 00000064 (fixed)
02 Interface Flags Interface status Read DWORD 0000000F (fixed)
03 Physical Address Interface MAC
address
Read ARRAY OF
USINT
*1
*1. The array size is 6.
MAC address
0B Interface Capability Interface communi-
cations perfor-
mance
Read STRUCT ---
Capability Bits Communications
performance set-
ting
DWORD See below.
Speed/Duplex
Options
Communications
speed/bidirectional
options
STRUCT ---
Speed/Duplex
Array Count
Communications
speed/bidirectional
array size
USINT 01
Speed/Duplex
Array
Communications
speed/bidirectional
array
ARRAY
OF
STRUCT
---
Interface Speed Interface communi-
cations speed
UINT 0064 (fixed)
Interface
Duplex Mode
Interface bidirec-
tional mode
USINT 01: Full duplex
(fixed)
Bit Name Value
0 Manual Setting Requirement Reset Always FALSE.
1 Auto-negotiate Always TRUE.
2 Auto-MDIX Always TRUE.
3 Manual Speed/Duplex Always FALSE.
4 to 31 Reserved Always FALSE.