1
Introduction
Introduction
Thank you for choosing the OMNUC G Series. This User’s Manual describes installation/wiring
methods and parameter setting procedures required for the operation of the OMNUC G Series as
well as troubleshooting and inspection methods.
Intended Readers
This manual is intended for the following personnel.
Those with knowledge of electrical systems (a qualified electrical engineer or the equivalent) as
follows:
• Personnel in charge of introducing FA equipment
• Personnel in charge of designing FA systems
• Personnel in charge of managing FA systems and facilities
NOTICE
This manual contains information necessary to ensure safe and proper use of the OMNUC G Series
and its peripheral devices. Please read this manual thoroughly and understand its contents before
using the products.
Please keep this manual handy for future reference.
Make sure this User’s Manual is delivered to the actual end user of the products.
To Next Page
Loading...
Need help?
General
