Omron R88D-GT series User Manual

6-15
6-4 Setting the Mode
6
Operation
 Automatic Servomotor Recognition
 Analog Input Value Display (Front Panel Operation)
Automatic recognition enabled (Always this indication is displayed.)
Input signal Input voltage (V)
Press the Increment or Decrement key to
select the signal to monitor.
The PCL analog input value (V) is displayed.
The REF analog input value (V)
after offset adjustment is displayed.
The NCL analog input value (V) is displayed.
Note: The displayed value will not be accurate if the voltage exceeds ±10 V.

Omron R88D-GT series Specifications

General

Brand	Omron
Model	R88D-GT series
Category	Controller
Language	English