Additional Functions
ZFX-C User’s Manual
3
SETTING THE MEASUREMENT CONDITIONS
119
Setting Reflection of Individual Results
You can select which item results are to be reflected in the overall judgment that is output to the OR signal of
the parallel interface.
X MENU mode - [Setup] - [Add func] - [OR setting]
The overall judgment result can be checked in the RUN mode or ADJ mode.
Setting value Description
Measurement item Sets measurement items to be included in the overall judgment to [ON].
Range: ON (default value), OFF
Position correction item Sets position correction items to be included in the overall judgment to [ON].
Range: ON (default value), OFF
Calc./variable Sets whether or not include the results of [Calculation/Variable] in the overall judgment.
Range: ON (default value), OFF
Calc./judge Sets whether or not include the results of [Calculation/Judgment] in the overall judgment.
Range: ON (default value), OFF
Calc./alarm Sets whether or not to include the [Calculation/Logging Monitor] alarm in the overall judg-
ment.
Range: ON, OFF (default value)
To Next Page
Loading...
Need help?
General
