Overview of Settings and Measurement
36
ZFX-C User’s Manual
Saving Setup Data
After you have set the measurement conditions, be sure to save the setup data.
All settings will be deleted if you turn the power OFF without saving the data.
1 Switch to the [MENU] mode.
The top screen is displayed.
2 Select the [Save] icon.
3 Select [OK].
Data Saved on the Controller
Bank settings and system settings are saved internally on the Controller. Image data is not saved on the Controller.
Save image data on the SD card.
When Using the Bank Group Function
Bank data that is set to bank group 0 is saved internally on the Controller. When the bank data of bank groups 1 to
31 is saved, the bank data on the SD card is overwritten with the bank data of bank groups 1 to 31.
Important
To Next Page
Loading...
