Setting Measurement Items
ZFX-C User’s Manual
3
SETTING THE MEASUREMENT CONDITIONS
63
Size Inspection
Area
The area, gravity and angle of the desired color can be measured. This allows you to inspect the size of the
measurement target, and detect positions and inclination.
Image adjustment
This function picks up the color to be measured.
X MENU mode - [Setup] - [Item] - [Img Adj]
When a color camera is connected, up to four colors can be specified as the color to be measured.
When a monochrome camera is connected to the Controller, black-and-white images are binarized. White pixels are
targeted in measurement.
Item Description
Select camera
For details, see "Image Adjustment". p.99
(Filtering, BGS level, Brightness Control can be used only when a monochrome camera is
connected.)
Color Pickup/Binary
Filtering
BGS level
Brightness Control
Setup
Measurement
Only the picked up color is judged to be the measurement target.
Measurement region
The color of the measurement target
is picked up.
Gravity of desired color
Number of pixels of desired color = area
Angle (angle of main axis)
θ
To Next Page
Loading...
