System Settings
ZFX-C User’s Manual
5
ADDITIONAL FUNCTIONS
145
Operation Settings
Set and change operation-related functions.
Display Capture
This function captures the content displayed on the LCD screen and saves it on SD card.
X MENU mode - [System] - [Operation] - [Display capture]
Executing display capture
Displays can be captured when [Capture] is displayed on the LCD screen. Select either the F4 function key or
[Capture] on the LCD screen.
File names
When display capture is executed, the directory "CAPTURE" is automatically created at the root directory on
the SD card, and an image file of the currently displayed screen is stored to the CAPTURE directory.
The format of file names is "CAPT***.BMP". A running number starting from 000 is automatically assigned to
"***".
It takes several seconds to capture displays, during which measurement cannot be executed. To prevent the inability
to perform measurement due to erroneous operation, set this function to OFF.
Setting value Description
OFF Disables the display capture function. (default value)
ON Enables the display capture function.
To Next Page
Loading...
Need help?
General
