Bank Settings
ZFX-C User’s Manual
5
ADDITIONAL FUNCTIONS
135
Bank Data Operations
The following operations can be performed on bank data.
X MENU mode - [Bank] - [Bank]
Bank Group Operations
When the bank group is switched to any group other than 0 and saved, the directory "BANKGRP" is
automatically created on the SD card. The data of bank groups is saved to this directory using file names
BGR_0001.BNG to BGR_0031.BNG.
When setup data has been changed, save the setup data before switching the bank group. Otherwise, the newly
changed setup data is cleared. To automatically save setup data when a bank group is switched, set [Save at switch
BG] to ON.
Saving during Switching of Bank Groups p.146
X MENU mode - [Bank] - [Bank Group]
Setup Item Description
Switch Switches the currently selected bank to other banks. Switching of banks can also be
instructed by operating the keys on the Controller, or by issuing external signals or serial
communication commands.
Range: 0 to 31
Copy Copies already created bank data to other banks.
Select [Copy] and the copy destination bank after displaying the copy source No.
(default value: Bank0)
Be sure to save bank data after copying a bank. Data is cleared when the Controller is
turned OFF after you just copy the data.
Rename Specified bank No. can be renamed with any name. (within 16 characters)
Erase Deletes specified bank data.
Setup Item Description
Switch Switches the bank group with the SD card attached. After the bank group is switched,
select the target bank No.
Range: 0 to 31
Copy/erase/rename can be executed on bank groups also.
Important
To Next Page
Loading...
Need help?
General
