Onkyo TX-NR545 - Page 135

theunit.TheTVscreenwillremainblackuntiltheupdateiscomplete
andthepoweristurnedonagain.
 Duringtheupdate,donotturnoff,ordisconnectandreconnectthe
USBstoragedevice.
 "Completed!"isdisplayedwhentheupdateiscomplete.
8. DisconnecttheUSBstoragedevicefromtheunit.
9. Press ON/STANDBYonthemainunittoturntheunitintostandby
mode.Theprocessiscompletedandyourfirmwareisupdatedtothe
latestversion.
 Donotuse RECEIVERontheremotecontroller.
IfanErrorMessageisDisplayed
Whenanerroroccurs,"＊＊＊Error!"isdisplayedontheunit.("＊"
representsanalphanumericcharacter.)Checkthefollowing:
ErrorCode
 ＊01,＊10:
USBstoragedevicenotfound.CheckwhethertheUSBstoragedeviceor
USBcableiscorrectlyinsertedtotheUSBportoftheunit.
ConnecttheUSBstoragedevicetoanexternalpowersourceifithasits
ownpowersupply.
 ＊05,＊13,＊20,＊21:
ThefirmwarefileisnotpresentintherootfolderoftheUSBstorage
device,orthefirmwarefileisforanothermodel.Retryfromthedownload
ofthefirmwarefile.
 Others
FirstdisconnectthenreconnecttheACpowercord,andthenretryfrom
thebeginning.