6.1.2. Web Client
OnRobot's Web Client is used to configure an Eyes application. To access it on your computer
first the Ethernet interface needs to be set up to have a proper communication between your
computer and the Eye Box. It is recommended to use the factory default DIP switch settings
(DIP 3 On and DIP 4
O).
Then do the following steps:
•
Connect the Eye Box to your computer with the supplied UTP cable.
•
Power the Eye Box with the supplied power supply (if it is not powered).
•
Wait one minute for the Eye Box LED to turn from blue to green.
•
Open a web browser on your computer and type in the IP address of the Eye Box (factory
default is 192.168.1.1).
•
The Sign-in page opens:
The factory default administrator login is:
Username: admin
Password: OnRobot
For the first login a new password needs to be entered: (password must be at least 8
characters long)
ADDITIONAL SOFTWARE OPTIONS
147
To Next Page
Loading...
