Chapter 1 General Information
Safety 1.1
Optical Radiation Hazards
Use of this instrument requires the operator to work near the optical path of lasers. Exposure to
radiation from these lasers may be sufficient to warrant the use of protective equipment.
Unless the laser’s optical path is enclosed, the operator should protect against accidental exposure.
Exposure to personnel other than the operator must also be considered. Hazards include direct
beam exposure and reflected radiation.
When working with an unenclosed beam path, it is advisable to do so while the laser is powered
down or at reduced power levels. Whenever there is a risk for dangerous exposure, protective eye
shields and clothing should be worn.
To Next Page
Loading...
