BeamSquared Model Numbers 1.2
All standard BeamSquared models are sold without a computer, or external optical accessories. An accessory
model of BeamSquared is available for purchase that allows operation with an existing SP300, SP920, or XC-
130 camera. Existing cameras must be returned to the factory to add the BeamSquared license.
BeamSquared Manual Mode Models 1.2.1
The Manual Mode System requires the end user to provide a manually operated system (see Chapter 9). The
optical train must include a focusing element, a means to translate the camera behind the focusing element, a
laser beam attenuation system, and a way to block the beam from reaching the camera sensor during
calibration. Accurate results depend on a well-designed optical system. The user has full responsibility for the
system performance.
Pyrocam license for BeamSquared.
Automated BeamSquared Models 1.2.2
SP300 camera and license with BeamSquared hardware.
SP920 camera and license with BeamSquared hardware.
XC-130 camera and license with BeamSquared hardware.
BeamSquared hardware accessory model, sold without a
camera, for customers that already own a compatible
camera system.
266-440nm UV 500mm FL
430-700nm VIS 500mm FL
430-700nm VIS 400mm FL
650-1000nm NIR 400mm FL
1000-1550nm NIR extended 400mm FL*
650-1000nm NIR 400mm FL
1000-1700nm NIR extended 400mm FL
1000-1550nm NIR extended 400mm FL
1000-1550nm NIR extended 600mm FL
* The SP300 and SP920 cameras are only sensitive between 190-1100nm.
To Next Page
Loading...
