Loading the Magazines
3-12 StorageTek SL150 Modular Tape Library User's Guide
cartridge with the hub down and the label and write-protect switch visible on the
open side of the magazine. Gently push the cartridge into the slot until the plastic
retention spring snaps into place.
The table below shows the diagnostic cartridge in slot
1,
Left,
1,
1
and a
universal cleaning cartridge in slot
1,
Left,
2,
1
. During final configuration, we
will reserve these slots for system use:
Table 3–3 Module 1, Left Magazine: a Diagnostic and a Cleaning Tape in Reserved Slots
Left Column 1 Column 2 Column 3 Column 4 Column 5
Row 1
DG 001
Row 2
CLNU01CU
Row 3
The table below shows a configuration that does not include a diagnostic
cartridge. The cleaning cartridge is in slot
1,
Left,
1,
1
. During final
configuration, we will reserve this slot for system use:
Table 3–4 Module 1, Left Magazine: a Cleaning Tape in a Reserved Slot
Left Column 1 Column 2 Column 3 Column 4 Column 5
Row 1
CLNU01CU
Row 2
Row 3
5.
If you plan to configure a reserved slot for a second cleaning cartridge, place the
cleaning cartridge in the next unoccupied slot in the first column. Insert the
cartridge with the hub down and the label and write-protect switch visible on the
open side of the magazine. Gently push the cartridge into the slot until the plastic
retention spring snaps into place.
The table below shows the diagnostic cartridge in slot
1,
Left,
1,
1
and universal
cleaning cartridges in slots
1,
Left,
2,
1
and
1,
Left,
3,
1
:
Table 3–5 Module 1, Left Magazine: Diagnostic and Cleaning Tapes in Reserved Slots
Left Column 1 Column 2 Column 3 Column 4 Column 5
Row 1
DG 001
Row 2
CLNU01CU
Row 3
CLNU02CU
The configuration below does not include a diagnostic cartridge. The cleaning
cartridges are in slot
1,
Left,
1,
1
and
1,
Left,
2,
1
:
Table 3–6 Module 1, Left Magazine: Cleaning Tapes in Reserved Slots
Left Column 1 Column 2 Column 3 Column 4 Column 5
Row 1
CLNU01CU
Row 2
CLNU02CU
Row 3
To Next Page
Loading...
