Oracle ZFS Storage Appliance Service Manual

Replacing a ZS3-2 Fan Module
Caution - Because 3.3 VDC standby power is always present in the system, you must unplug
the power cords before accessing any cold-serviceable components.
5.
Extend the controller from the rack as described in “Extending the Storage
Controller from the Rack” on page 51.
6.
Remove the top cover as described in “Removing the Top Cover” on page 52.
7.
Grasp the green band of the fan module to be removed with your forefinger and
press down on the fan module with your thumb.
8.
Pull the band straight up and lift the fan module out of the chassis.
Servicing the ZS3-2 Controller 137

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest