Panasonic CZ-CFUNC2

ー 121 ー
Operating Instructions Intelligent Controller
150
Conguring the system
Setting
1
Touch [RglrHourRnge stngs].
z The “Regular hour range settings” dialogue is displayed.
1
2
Touch the cell to be entered.
z You can select all of the time slots for a day of the week by
touching the day of the week column.
2
3
Set the start and end times.
z Use to set “Hours” and “Minutes”.
3
4
Touch [Set].
z The set time is displayed in the cell. z To delete the set time slot, select the time slot to delete
and touch [Clear].
z To copy the set time slot, select the time slot to copy and
touch [Copy]. Next select the place you want to paste to and touch [Paste].
4
5
Touch [Register].
z The “Regular hour range settings” dialogue closes. z To cancel the settings, touch [Cancel].
5
6
Put a check mark next to “Valid”.
6
Basic settings for distribution calculation
Set the target time slots for distribution calculation
151
Conguring the system
Setting
Changing the name of the schedule group Edit the name of the operating schedule group.
4
Touch [Sttng].
z The “Edit schedule group settings” dialogue is displayed.
4
5
Change the settings.
Item Explanation
Name Edit the name of the schedule group.
You can enter up to 16 letters or numbers.
Display
Use
to set the order when displayed
in a list.
Continued on next page
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Schedule group name settings].
z The “Set schedule group name” screen is displayed.
2
3
Put a check mark in the “Select” column.
z Select the schedule group name to be edited.
3
TGR-318_ENG.indb 121 2017/04/06 10:44:10