EasyManua.ls Logo

Panasonic CZ-CFUNC2 - Page 134

Panasonic CZ-CFUNC2
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ー 132
Operating Instructions Intelligent Controller
172
Maintenance settings
Setting
Maintenance settings
This chapter explains how to set the date and time, and other adjustments such as the volume and the
brightness of the screen.
Screen menu Overview Page
Display/Volume settings
Adjust the brightness of the unit’s screen and the sound of the buzzer. 173
Intelligent Controller info
Register the contacts for servicing (telephone numbers) for this unit. 174
Software update
Update the software for this unit. 175
Initialize
Initialise the settings for this unit.
The user not initialise under any circumstances.
176
Language&TimeZone sttngs
Set the language to be used when setting and operating this unit. 179
Date settings
Manually set the date and time. 178
Screen menu Overview Page
Test run
Perform a test operation of the indoor unit after installing this unit. 181
A/C communication settings
Make settings such as the communications protocol between this unit and the air
conditioning units.
184
Maintenance information
Register the units that will require maintenance. 186
173
Maintenance settings
Setting
Setting the screen display and volume for this unit
You can adjust the brightness of the screen or adjust the buzzer sound.
3
Change the settings.
Item Explanation
Brgtns Adjust the brightness of the back light in 5 steps
(1 to 5).
Off time
AftrOper
The back light automatically turns off after the
specied time* if the unit is not operated. The back
light does not turn off if you touch [Invalid].
* The actual time can differ by about a minute.
CleanngMde All operations are disabled on the liquid crystal
display when you touch this [Start] so that you can
clean it.
This is cancelled when you touch [END].
Auto logout
time
Log out automatically after the specied time.
(“30 m”, “1hour”, or “12 hrs”)
Buzzr vol. You can adjust the volume of the buzzer. No sound
is output if you touch [Qiet].
4
Touch [Register].
z To cancel the settings, touch [Cancel].
4
1
Touch [IntelContrlr maint] in “Settings”.
z The “IntelContrlr maint” screen is displayed.
1
2
Touch [Display/Volume settings].
z The “Display/Volume settings” screen is displayed.
2
TGR-318_ENG.indb 132 2017/04/06 10:44:26

Table of Contents

Other manuals for Panasonic CZ-CFUNC2

Related product manuals