ー 133 ー
Operating Instructions Intelligent Controller
174
Maintenance settings
Setting
Register the contacts for servicing for this unit
Register the contacts for servicing (telephone numbers) for this unit.
4
Enter the telephone number.
5
Touch [Register].
z To cancel the settings, touch [Cancel].
5
1
Touch [IntelContrlr maint] in “Settings”.
z The “IntelContrlr maint” screen is displayed.
1
2
Touch [Intelligent Controller info].
z The “Show service contact info.” screen is displayed.
2
3
Touch the text box.
z The touchscreen keyboard is displayed.
3
175
Maintenance settings
Setting
Update the software
Update the software for this unit from a USB memory device.
A service person should perform this operation.
4
Select the version to update (4-1) and
touch [Strt] (4-2).
z The software update conrmation message is displayed.
4-
2
4-
1
5
Touch [Strt].
z A conrmation message appears again.
z To cancel the update, touch [Cancel].
6
Touch [Update].
z The update starts. The progress of the update is shown as
a percentage.
z The unit automatically restarts when updating is complete.
1
Open the storage door and connect
a USB memory device to the USB
terminal.
2
Touch [IntelContrlr maint] in “Settings”.
2
3
Touch [Software update].
z The “Software update” screen is displayed.
3
TGR-318_ENG.indb 133 2017/04/06 10:44:28
To Next Page
Loading...
