ー 136 ー
Operating Instructions Intelligent Controller
180
Maintenance settings
Setting
7
Touch [Register].
z The settings are registered and the unit automatically
restarts.
z To cancel the settings, touch [Cancel].
7
6
Select the time zone to display.
z You can select [UTC-12] to [UTC-1], [UTC], and [UTC+1]
to [UTC+14]. Find the difference between the time in
the installation location of the intelligent controller and
Coordinated Universal Time (UTC). If the former is 1 hour
ahead of the latter, for example, select [UTC+1].
z The settings are registered and the “Select time zone”
dialogue closes.
6
Setting the language and time zone
181
Maintenance settings
Setting
Running a test operation
You can run test operations for indoor units for each outdoor unit system address.
(2) Select the line number.
z The settings are registered and the “Line No.” dialogue
closes.
3-
2
4
Select the link.
(1) Touch [Link].
z The “Link” dialogue is displayed.
4-
1
(2) Select the linked system you want to run
the test operation for.
z The settings are registered and the “Link” dialogue closes.
z The outdoor units in the selected linked system are
displayed in a list.
4-
2
Continued on next page
1
Touch [A/C maintenance] in “Settings”.
z The “A/C maintenance” screen is displayed.
1
2
Touch [Test run].
z The “Test run” screen is displayed.
2
3
Select the line number.
(1) Touch [Line No.].
z The “Line No.” dialogue is displayed.
3-
1
TGR-318_ENG.indb 136 2017/04/06 10:44:33
To Next Page
Loading...
