54
Setting a schedule
Operation/Status
“Schedule/results” screen
A: Select the year, month, and day to display.
The calendar screen is displayed when you
touch
and you can select the date.
B: Change list order. The list order changes
each time you touch it.
Display
The display follows the order set
in “I/D unit settings” (P.141).
O/D unit The display follows the address
order of the outdoor unit
systems.
Address The display follows the order of
the central addresses.
C: The day’s schedule and past operating
performance is displayed in a list for each
indoor unit.
The schedules are displayed in the 24-hour
format with the passage of time indicated
with a horizontal line.
The upper part of the row shows the planned
schedule and the lower part of the row
shows the past performance.
The colour key is as follows:
Blue: Cooling Light blue: Dry
Red: Warming Grey: Fan
Green: Automatic
Note
Past performance is not displayed in the following cases:
y When a date after the next day is specied in setting A
y When the power of the indoor unit has been turned off so that the schedule could not be executed
D: The “Detailed schedule” dialogue is displayed when you touch this. Details about the schedules for indoor units with a check mark
in the “Select” column are displayed.
A
B
C
D
The “Detailed schedule” dialogue
A: The name of the selected indoor unit or
schedule group is displayed.
B: The daily running mode is displayed.
The time line for a set schedule for one day is
displayed.
C: Details of B are displayed in a list.
Note
y You can check the future schedule in this screen.
Settings cannot be changed.
A
B
C
Checking the future schedule and past performance
55
Setting a schedule
Operation/Status
Temporarily modifying or adding a schedule
You can temporarily change the schedule for ve days starting with the current day and up to 4 days into
the future.
You cannot change the settings in the “Schedule setting” screen.
4
Put a check mark in the “Select” column.
z Select the indoor unit or schedule group whose settings
you want to change.
4
5
Touch [Edit].
z The “Detail setting” dialogue is displayed.
5
6
Change and add settings.
z Refer to “Changing the settings in setting cells” (P.48) to
change the settings.
z Refer to step 6 in “Setting a schedule” (P.44) to add
settings.
z Refer to step 6 in “Setting a schedule” (P.44) for the setting
items.
Continued on next page
1
Touch [Set schedule] in “Oper./Status”.
1
2
Touch [Update schedule].
z The “Update schedule” screen is displayed.
2
3
Use to select the year, month,
and day.
3
To Next Page
Loading...
