Dial-in setup for PPP server
130 FP Web-Server V2.810 EN
Chapter 14
Dial-in setup for PPP server
14.1 Dial-in networking setup for computer/FP Web-Server
The FP Web-Server can administer a modem that permits logging onto a
PPP client and establishing a TCP/IP connection to the FP Web-Server via
modem.
When the connection has been established, the functions are the same as
the ones described above for Ethernet communication.
Functions possible:
Http/Https server for Web pages
RS232C/RS485/USB<->Ethernet ports
Modbus communication
Remote configuration
In addition, the FP Web-Server provides a "Gateway" function that allows
other FP Web-Servers (that are connected to the "Gateway" FP Web-Server
via the Ethernet) to be accessed via a long-distance modem connection. A
description of the gateway setup can be found under PPP gateway functions
(see p. 139).
In this section, the installation of a Windows computer and modem is
described. Using its standard Windows dial-up networking (PPP client)
functions you can call up an FP Web-Server.
For a detailed description of the parameters for the PPP server in the FP
Web-Server, refer to PPP server Configurator inputs and parameters (see
p. 145).
To Next Page
Loading...
