Panasonic FP Web-Server2 - Targeted Peripheral List of the USB Host Port; Important Notes

Hardware description
30 FP Web-Server V2.810 EN
Feature
FP Web Expansion Unit
Vibration resistance:
10Hz to 55Hz, 1 cycle per minute with a double
amplitude of 0.75mm; 10 minutes every X-, Y-, and
Z-axis
Shock resistance:
Min. 10g; 4 times every X-, Y-, and Z-axis
Dimensions:
Height 90mm, Width 25mm, Depth 64mm
Weight:
Approx. 66g
Operating
conditions:
Free of corroding gases and excessive influence of dust
CE conformity:
EN 55022:2006 + A1:2007; Class B
EN 55024:1998 + A1:2001 + A2:2003; Class A
Hardware version
Refer to hardware version (see p. 16)
2.2.5 Targeted peripheral list of the USB host port
The USB host port of the FP Web expansion unit supports FP-X PLCs and
GT series HMIs. More details can be found in the following targeted
peripheral list.
Manufacturer
Model
Vendor
ID
Product
ID
Description
Speed
Panasonic
Electric Works,
Ltd.
GT series
0x0986
0x0310
Panasonic GT
USB driver ver.
1.0
Full speed
Silicon
Laboratories,
Inc.
CP2101 USB
to UART
Bridge
Controller
0x10C4
0xEA60
Panasonic FP-X
series USB
driver
Full speed
2.2.6 Important notes
Please also see the installation instruction leaflet supplied with your FP Web
expansion unit for important notes, cables and installation.
To prevent malfunction or failure, please refer to the important notes (see
p. 21) for the FP Web-Server concerning the installation environment and
space.