Panasonic FP Web-Server2 - FP Web-Server Unit Package

Hardware description
FP Web-Server V2.810 EN 17
Hardware version 1.01 has improved PLL circuitry on the CPU for a better
start-up behavior.
Hardware version 1.1 contains an additional right-side expansion connector
to support the FP Web expansion unit .
Comment:
The FP Web Configurator Tool (Ver.2.3 and higher) can configure all
available hardware types and versions.
2.1.3 FP Web-Server unit package
The FP Web-Server unit package of Panasonic contains:
 one FP Web-Server unit
 a 24V DC power cable
 a leaflet providing installation instructions
 Phoenix 3-pin screw terminal
Comments:
 The FP Web-Server network will be configured via the Control FP Web
Configurator Tool.
 The Control FP Web Configurator Tool can be purchased separately.
 For creating HTML pages a standard HTML editor (not supplied with the
Configurator) is required.