Panasonic FP Web-Server2 - 2 Hardware Description; The FP Web-Server Unit; Introduction

Hardware description
FP Web-Server V2.810 EN 15
Chapter 2
Hardware description
2.1 The FP Web-Server unit
2.1.1 Introduction
Please read the safety instructions in important notes (see p. 21) and also
the section on mechanical installation (see p. 23) carefully.
The FP Web-Server allows you to connect the Panasonic FP Series PLCs to
an Ethernet Network (LAN).
The FP Web-Server works as an Interface between a LAN or a WAN
network (Internet/ Intranet) and all PLCs of the FP Series.
The following main features are supported:
 RS232C/ Ethernet Interface (remote programming monitoring and
visualization)
 Web-Server (http/https server supplies HTML pages with PLC data (see
comments))
 E-mail (SMTP protocol)
 Modem/Ethernet gateway (PPP Server function)
 Modbus-TCP/RTU functions
 NTP time synchronization
 Optional: IEC60870
 SNMPv1 agent
 FTP client, FTP server
 Data logger (requires FP Web expansion unit)
A Windows program is supplied to make the configuration of the FP
Web-Server easy (see comments).
Note