Additional information
186 FP Web-Server V2.810 EN
20.7 Troubleshooting
Some functions of the unit can be disabled with the function upload
configuration with security options. This can cause some error messages if
you try to change the configuration afterwards. Please check the security
options (or reset (see p. 178) the unit) if you discover problems in
following situations:
– Unit is not listed with [Find] function
– Unit cannot be selected for configuration
– Unit does not accept new IP via UDP configuration
– No files can be transferred to the unit
– Unit cannot be restarted
20.7.1 Network communication problems
If you have problems with the FP Web ConfiguratorTool finding ([Find]) and selecting
(double-click) an FP Web-Server unit, please check the network settings.
If an automatically generated IP address setting is to be used
Make sure that the computer and the FP Web-Server's configuration is set
up to use a DHCP server.
1. Under "Settings / Network Connections", open the properties dialog of
the computer's Ethernet/LAN card
2. Open the “Internet Protocol (TCP/IP)” properties dialog
3. Verify that the option button “Obtain IP address automatically” is set
To Next Page
Loading...
