Line No.
Description Selects which lines (1–8) can be seized when going off-hook to make
a call for the base unit and each handset.
Value Range Selected, Not selected
Note
• If you clear all the check boxes for the base unit and the
handsets,
calls cannot be made from either the base unit or the
handsets.
Default Value Selected (all)
Configuration File Reference
• OUTGOING_CALL_LINE_HS[1–6] (Page 176
)
• OUTGOING_CALL_LINE_BS (Page 176)
Default
Description Selects which line to seize automatically when going off-hook to make
a call for the base unit and each handset.
Note
• If
the line selected as [Default] is not selected as a line that can
be seized for the corresponding base unit or handset in [Line
No.], the unit cannot make a call.
Value Range 1–8
Default Value 1
Configuration File Reference
• DEFAULT_LINE_SELECT_HS[1
–6] (Page 177)
• DEFAULT_LINE_SELECT_BS (Page 177)
Document Version 2013-02 Administrator Guide 107
3.7.1 Multi Number Settings
To Next Page
Loading...
