Value Range
• Yes
• No
Note
• If you select [Yes], the conversation cannot be interrupted by
another handset or base unit. If you select [No], the
conversation can be interrupted by another handset or base
unit.
Default Value Yes
Configuration File Reference PRIVACY_MODE_[1–8] (Page 196)
Voice Mail Access Number
Description Specifies the phone number used to access the voice mail server.
Note
• Your phone system must support voice mail.
Value Range Max. 24 characters (consisting of 0–9, *, and #)
Note
• No other characters are allowed.
Default Value Not stored.
Configuration File Reference VM_NUMBER_[1–8] (Page 193)
Enable Shared Call
Description Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• You cannot set both [Enable Shared Call] and [Synchronize
Do
Not Disturb and Call Forward] to [Yes] at the same time.
• Availability depends on your phone system.
Value Range
• Yes
• No
Note
• If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server
will control the line by using a standard signaling method.
Default Value No
Configuration File Reference SHARED_CALL_ENABLE_[1–8] (Page 195)
Document Version 2013-02 Administrator Guide 111
3.7.3 Call Control [Line 1]–[Line 8]
To Next Page
Loading...
