Panasonic KX-TGP500 - Programming Instructions; Before Accessing the Web User Interface

Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Provisioning
Maintenance
Provisioning
Maintenance
Enable Provisioning
*2
ü
Page 126
Standard File URL
*2
ü
Page 127
Product File URL
*2
ü
Page 127
Master File URL
*2
ü
Page 127
Cyclic Auto Resync
*2
ü
Page 128
Resync Interval
*2
ü
Page 128
Header Value for Resync
Event
*2
ü
Page 128
Reset to Defaults – –
ü
Page 130
Restart – –
ü
Page 130
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through configuration file programming.
3.2 Programming Instructions
3.2.1 Before Accessing the Web User Interface
Recommended Environment
This unit supports the following specifications:
HTTP Version HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Authentication Method Digest (or Basic)
The Web user interface will operate correctly in the following environments:
Operating System Microsoft
®
Windows
®
XP or Windows Vista
®
operating system
Web Browser Internet Explorer
®
6.0 (Windows XP only), Internet Explorer 7.0, or
Internet Explorer 8.0 internet browser
Language (recommended) English
Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to the
User Guide on the Panasonic Web site (® see Introduction).
52 Administrator Guide Document Version 2013-02
3.2.1 Before Accessing the Web User Interface