Panasonic KX-TGP500 - Global IP Address; Enable Global IP Address Usage Per Line; Line 1-Line 8

packets might be blocked by the router, depending on the SIP server. To avoid this problem, this setting is
required. For details, see 1.1.10.2 NAT (Network Address Translation) Setup.
3.4.5.1 Global IP Address
Global IP Address
Description Specifies the global IP address of your network.
Note
• You must enter a value in this field if at least 1 of [Line 1]–
[Line 8] is set to [Yes], or when port numbers are specified in
[Channel 1–3].
• The global IP address will reflect SIP messages and RTP
packets.
Value Range IP address in dotted-decimal notation ("n.n.n.n" [n=0-255])
Default Value Not stored.
3.4.5.2 Enable Global IP Address Usage per Line
Line 1–Line 8
Description Selects whether to enable the NAT Traversal feature for each line.
Value Range
• Yes
• No
Default Value No
76 Administrator Guide Document Version 2013-02
3.4.5 Static NAPT Settings