COUNTRY_CALLING_CODE_EX
Value Format Boolean
Description Selects whether to replace "COUNTRY_CALLING_CODE"
of an caller ID
to "NATIONAL_ACCESS_CODE", when the phone number for incoming
calls contains "COUNTRY_CALLING_CODE".
Value Range
• Y (Replace)
• N (Do not replace)
Default Value
N
SIP_REQURI_PORT_[1–8]
Parameter Name Example SIP_REQURI_PORT_1, SIP_REQURI_PORT
_2, …,
SIP_REQURI_PORT_8
Value Format Boolean
Description Specifies whether to add the port parameter to Request-Line in the
initial SIP request.
Value Range
• Y (Add the port parameter)
• N (Do not add the port parameter)
Note
• Request-Line (Request-URI of REGISTER) example:
– "Request-Line: REGISTER sip:
192.168.0.10:5060 SIP/2.0", when set to "Y"
– "Request-Line: REGISTER sip:192.168.0.10
SIP/2.0", when set to "N"
Default Value
Y
SIP_ADD_RPORT_[1–8]
Parameter Name Example SIP_ADD_RPORT_1, SIP_ADD_RPORT
_2, …,
SIP_ADD_RPORT_8
Value Format Boolean
Description Specifies whether to add the "rport" parameter to the "Via" header of
SIP messages.
Document Version 2013-02 Administrator Guide 217
4.7.2 SIP Settings
To Next Page
Loading...
