3.5.5.1 Synchronization
Enable Synchronization by NTP
Description Selects whether to enable the unit to automatically adjust its clock
according to the time information provided by an NTP server.
Value Range
• Yes
• No
Note
• Even if you select [Yes], this feature will not function properly
if the NTP server address setting is invalid.
Default Value Yes
Synchronization Interval
Description Specifies the interval, in seconds, between synchronizations with the
NTP server.
Value Range 10–86400
Default Value 43200
Configuration File Reference TIME_QUERY_INTVL (Page 173)
3.5.5.2 Time Server
NTP Server Address
Description Specifies the IP address or FQDN of the NTP server.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference NTP_ADDR (Page 173)
3.5.5.3 Time Zone
Time Zone
Description Selects your time zone.
Value Range GMT -12:00–GMT +13:00
Default Value GMT
Configuration File Reference TIME_ZONE (Page 143)
82 Administrator Guide Document Version 2013-02
3.5.5 Time Adjust Settings
To Next Page
Loading...
