Panasonic KX-TGP500 - Syslog Settings; Syslog_Event_Sip; Syslog_Event_Cfg; Syslog_Event_Voip

Value Range Max. 70 characters
Default Value Empty string
4.3.3 Syslog Settings
SYSLOG_EVENT_SIP
Value Format Integer
Description Specifies which SIP-related syslog events are sent to the syslog server.
Note
• If
the level of the event is higher than or equal to the set value,
the log is sent to the syslog server.
• This setting is not applicable for the current version. No logs will
be sent to the syslog server, even if values "1–6" are specified.
Value Range 0–6
– 0: no logs sent
– 1: emergency (highest)
– 2: alert
– 3: critical
– 4: error
– 5: warning
– 6: information (lowest)
Default Value 0
SYSLOG_EVENT_CFG
Value Format Integer
Description Specifies the threshold of syslog events regarding configuration.
Note
• This
setting is not applicable for the current version. No logs will
be sent to the syslog server, even if values "1–6" are specified.
Value Range 0–6
Default Value 0
SYSLOG_EVENT_VOIP
Value Format Integer
Description Specifies the threshold of syslog events regarding VoIP operation.
Note
• This
setting is not applicable for the current version. No logs will
be sent to the syslog server, even if values "1–6" are specified.
148 Administrator Guide Document Version 2013-02
4.3.3 Syslog Settings