Value Range
• 0 (Disable)
• 1 (Enable)
Note
• The format must be "x,x,x,x,x,x,x,x
" (x: line numbers 1 to 8
starting from the left).
• If you set all the values for the lines to "0" in this format, calls
cannot be made from the base unit.
Default Value 1,1,1,1,1,1,1,1
Web User Interface Reference
• Base (KX-TGP55x only) (Page 106)
• Line No. (Page 107
)
DEFAULT_LINE_SELECT_HS[1–6]
Parameter Name Example DEFAULT_LINE_SELECT_HS1, DEFAULT_LINE_SELECT_HS2, …,
DEFAULT_LINE_SELECT_HS6
Value Format Comma-separated Integer
Description Specifies which lines (1–8)
to seize automatically when going off-hook
to make a call for each handset, using 8 whole numbers (0 or 1)
separated by commas.
Value Range
• 0 (Disable)
• 1 (Enable)
Note
• The format must be "x,x,x,x,x,x,x,x
" (x: line numbers 1 to 8
starting from the left).
• "1" must be specified only once as a line that can be seized
automatically when going off-hook in this format.
• If the line specified in this parameter is not specified as a line
that can be seized for the corresponding handset in
"OUTGOING_CALL_LINE_HS[1–6]", the handset cannot
make a call.
Default Value 1,0,0,0,0,0,0,0
Web User Interface Reference Default (Page 107)
DEFAULT_LINE_SELECT_BS
Value Format Comma-separated Integer
Description Specifies which lines (1–8)
to seize automatically when going off-hook
to make a call for the base unit, using 8 whole numbers (0 or 1)
separated by commas.
Document Version 2013-02 Administrator Guide 177
4.5.1 Multi Number Settings
To Next Page
Loading...
