Description Specifies whether to synchronize the Do Not Disturb and Call Forward
settings,
configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
• Even
if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
• You cannot set both "SHARED_CALL_ENABLE_[1–8]" and
"SYNCHRONIZATION_ENABLE_[1–8]" to "Y" at the same
time.
Value Range
• Y (Enable Do Not Disturb/Call Forward synchronization)
• N (Disable Do Not Disturb/Call Forward synchronization)
Default Value
N
Web User Interface Reference Synchronize Do Not Disturb and Call Forward (Page 112)
PRIVACY_MODE_[1–8]
Parameter Name Example PRIVACY_MODE_1, PRIVACY_MODE
_2, …, PRIVACY_MODE_8
Value Format Boolean
Description Specifies whether to enable privacy mode, which prohibits another
handset or base unit from barging in on a conversation.
Value Range
• Y (Enable privacy mode)
• N (Disable privacy mode)
Note
• If set to
"Y", the conversation cannot be interrupted by another
handset or base unit.
• If set to "N", the conversation can be interrupted by another
handset or base unit.
Default Value
Y
Web User Interface Reference Enable Privacy Mode (Page 110)
VM_COUNT_ENABLE
Value Format Boolean
Description Displays the number of voice mails on the screen.
Value Range Y (Enable [Displays the number of voice mails])
N (Disable)
Default Value
N
196 Administrator Guide Document Version 2013-02
4.7.1 Call Control Settings
To Next Page
Loading...
