Panasonic KX-TGP500 - Shared_Call_Enable_[1-8]; Shared_User_Id_[1-8]; Synchronization_Enable_[1-8]

SHARED_CALL_ENABLE_[1–8]
Parameter Name Example SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE
_2, …,
SHARED_CALL_ENABLE_8
Value Format Boolean
Description Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• You cannot set both "SHARED_CALL_ENABLE_[1–8]" and
"SYNCHRONIZATION_ENABLE_[1–8]" to "Y" at the same
time.
• Availability depends on your phone system.
Value Range
• Y (Enable shared call)
• N (Disable shared call)
Note
• If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
• If set to "N", the SIP server will control the line by using a
standard signaling method.
• If this value is not specified, it is treated as "N".
Default Value
N
Web User Interface Reference Enable Shared Call (Page 111)
SHARED_USER_ID_[1–8]
Parameter Name Example SHARED_USER_ID_1, SHARED_USER_ID_2, …,
SHARED_USER_ID_8
Value Format String
Description Specifies the unique ID used by the SIP server when
"SHARED_CALL_ENABLE
_[1–8]" is set to "Y".
Value Range Max. 24 characters
Default Value Empty string
Web User Interface Reference Unique ID of Shared Call (Page 112)
SYNCHRONIZATION_ENABLE_[1–8]
Parameter Name Example SYNCHRONIZATION_ENABLE_1, SYNCHRONIZATION_ENABLE
_2,
…, SYNCHRONIZATION_ENABLE_8
Value Format Boolean
Document Version 2013-02 Administrator Guide 195
4.7.1 Call Control Settings