Panasonic KX-TGP500 - Cw_Enable_[1-8]; SIP Settings; Sip_User_Agent; Sip_Authid_[1-8]

CW_ENABLE_[1–8]
Parameter Name Example CW_ENABLE_1, CW_ENABLE_2, …, CW_ENABLE_8
Value Format Boolean
Description Specifies whether automatic call waiting is enabled.
Value Range
• Y (Enable Call Waiting)
• N (Disable Call Waiting)
Default Value
Y
4.7.2 SIP Settings
SIP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference SIP User Agent (Page 86)
SIP_AUTHID_[1–8]
Parameter Name Example SIP_AUTHID_1, SIP_AUTHID_2, …, SIP_AUTHID_8
Value Format String
Description Specifies the authentication ID required to access the SIP server.
Value Range Max. 64 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication ID (Page 91)
Document Version 2013-02 Administrator Guide 197
4.7.2 SIP Settings