Panasonic KX-TGP500 - Rtp_Ptime; Tos_Rtcp_[1-8]

Description Specifies the highest port number that the unit will use for RTP packets.
Note
• If port numbers are specified in [Channel 1–3] in
3.4.5.3 External RTP Port in the Web user interface, this
setting is ignored and the corresponding external RTP port is
enabled.
Value Range 1424–59998 (even number only)
Note
• The value for this setting must be greater than or equal to
"RTP_PORT_MIN" + 400.
Default Value 20000
Web User Interface Reference Maximum RTP Port Number (Page 97)
RTP_PTIME
Value Format Integer
Description Specifies the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
Default Value 20
Web User Interface Reference RTP Packet Time (Page 96)
TOS_RTCP_[1–8]
Parameter Name Example TOS_RTCP_1, TOS_RTCP_2, …, TOS_RTCP_8
Value Format Integer
Description Specifies the value to be stored in the ToS (Type of Service) field in the
IP header of RTCP packets as a DSCP for DiffServ.
Note
• Please refer to the description of TOS_RTP_[1-8] about the
structures of the ToS/DS field in an IP header.
Value Range 0–255
Note
• Please refer to the value range of TOS_RTP_[1-8] for detail.
Default Value 0
Document Version 2013-02 Administrator Guide 191
4.6.2 RTP Settings