Panasonic KX-TGP500 - HTTP Authentication; Authentication ID; Authentication Password; Proxy Server Settings

Value Range Max. 40 characters
Note
• You cannot leave this field empty.
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower
-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT (Page 171)
3.4.3.2 HTTP Authentication
Authentication ID
Description Specifies the authentication ID required to access the HTTP server.
Value Range Max. 64 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Authentication Password
Description Specifies the authentication password used to access the HTTP server.
Value Range Max. 64 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
3.4.3.3 Proxy Server Settings
Enable Proxy
Description Selects whether to use the proxy server.
Value Range
• Yes
• No
Default Value No
Proxy Server Address
Description Specifies the IP address or FQDN of the proxy server.
Document Version 2013-02 Administrator Guide 73
3.4.3 HTTP Client Settings