Default Value 80
Note
• When you change the default value of the port number to a
value other than "80", such as "8080
", enter the URL for
accessing the Web user interface using the following format:
"http://192.168.0.100:8080/"
(192.168.0.100: IP address of the unit)
Port Close Timer
Description Specifies the length of time, in minutes, to keep the Web port open when
there has been no communication between the unit and the PC. If the
specified length of time elapses without any communication, the Web
port
closes automatically. Communication is detected when you click a
tab, menu item, the [Save] button, or by reloading the application or
pressing the F5 key.
Value Range 1–1440
Default Value 30
3.5.5 Time Adjust Settings
This
screen allows you to enable automatic clock adjustment using an NTP server and configure the settings
for DST (Daylight Saving Time), also known as Summer Time.
Document Version 2013-02 Administrator Guide 81
3.5.5 Time Adjust Settings
To Next Page
Loading...
