Panasonic KX-TGP500 - Rfc2543_Hold_Enable_[1-8]; Dtmf_Relay_[1-8]; Line Settings; Call Control Settings

RFC2543_HOLD_ENABLE_[1–8]
Parameter Name Example RFC2543_HOLD_ENABLE_1, RFC2543_HOLD_ENABLE
_2, …,
RFC2543_HOLD_ENABLE_8
Value Format Boolean
Description Specifies whether to enable the RFC 2543 Call Hold feature on this line.
Value Range
• Y (Enable RFC 2543 Call Hold)
• N (Disable RFC 2543 Call Hold)
Note
• If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
• If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Default Value
Y
Web User Interface Reference Supports RFC 2543 (c=0.0.0.0) (Page 101)
DTMF_RELAY_[1–8]
Parameter Name Example DTMF_RELAY_1, DTMF_RELAY_2, …, DTMF_RELAY_8
Value Format Boolean
Description Selects whether DTMF tones are sent in the SIP INFO message.
Value Range
• Y
• N
Note
• If
set to "Y", DTMF tones will be sent in the SIP INFO message.
• If set to "N", the method selected in "OUTBANDDTMF_[1-8]"
will be used.
Default Value
N
4.7 Line Settings
4.7.1 Call Control Settings
VM_NUMBER_[1
–8]
Parameter Name Example VM_NUMBER_1, VM_NUMBER_2, …, VM_NUMBER_8
Value Format String
Document Version 2013-02 Administrator Guide 193
4.7.1 Call Control Settings