Panasonic KX-TGP500 - User_Dns2_Addr; DNS Settings; Dns_Qry_Prll

Description Specifies the IP address of the primary DNS server.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Web User Interface Reference DNS1 (Page 68)
USER_DNS2_ADDR
Value Format String
Description Specifies the IP address of the secondary DNS server.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Web User Interface Reference DNS2 (Page 69)
4.4.2 DNS Settings
DNS_QRY_PRLL
Value Format Boolean
Description Specifies the DNS query method as parallel or sequential.
Value Range
• Y (Parallel)
• N (Sequential)
Note
• If
set to "Y", the unit sends out all DNS queries at the same time.
The first DNS reply will be accepted and used by the unit.
• If set to "N", the unit sends DNS queries sequentially.
The unit sends a request to the DNS server with the highest
priority for a preprogrammed time period (5 seconds). When the
timer expires, the unit sends a request to the DNS server with
the second priority.
Default Value
Y
Document Version 2013-02 Administrator Guide 167
4.4.2 DNS Settings