Panasonic KX-TGP500 - Tone Settings; Dial Tone; Tone Frequencies; Tone Timings

3.7.4 Tone Settings
This screen allows you to configure the dual
-tone frequencies and ring tone patterns of each tone.
3.7.4.1 Dial Tone
Tone Frequencies
Description Specifies the dual-tone
frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
Value Range 0, 200–1000 (0: No tone)
Note
• If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
Default Value 350,440
Configuration File Reference DIAL_TONE_FRQ (Page 180)
Tone Timings
Description Specifies the pattern, in milliseconds, of dial tones using 4 whole
numbers (on 1, off 1, on 2, off 2) separated by commas.
118 Administrator Guide Document Version 2013-02
3.7.4 Tone Settings