Panasonic KX-TGP500 - Sdp_Param[0-4]_[1-8]; Sdp_Ptype[0-4]_[1-8]

Description Specifies the sampling rate with "SDP_CKRTEx_y" for the
corresponding encoding name specified by
"SDP_CODECx_y" (x:
priority, y: line number).
Value Range 0, 8000, or 16000 (0: Unused SDP, 8000 or 16000: Available SDPs)
Note
• The value "16000
" is valid only for the G722 codec.
Default Value 8000
SDP_PARAM[0–4]_[1–8]
Parameter Name Example SDP_PARAM0_1, SDP_PARAM0_2, …, SDP_PARAM0_8,
SDP_PARAM1_1, SDP_PARAM1_2, …, SDP_PARAM1_8, …,
SDP_PARAM4_1, SDP_PARAM4_2, …, SDP_PARAM4_8
Value Format Integer
Description Specifies the number of audio channels with "SDP_PARAMx_y" for the
corresponding encoding name specified by "SDP_CODECx_y" (x:
priority, y: line number).
Note
• For the current version, only the value "0
" is supported.
Value Range 0, 1–255 (0: No parameter specification, 1–255: Audio channels)
Default Value 0
SDP_PTYPE[0–4]_[1–8]
Parameter Name Example SDP_PTYPE0_1, SDP_PTYPE0_2, …, SDP_PTYPE0_8,
SDP_PTYPE1_1, SDP_PTYPE1_2, …, SDP_PTYPE1_8, …,
SDP_PTYPE4_1, SDP_PTYPE4_2, …, SDP_PTYPE4_8
Value Format Integer
Description Specifies the payload type number with "SDP_PTYPEx_y" for the
corresponding encoding name specified by
"SDP_CODECx_y" (x:
priority, y: line number).
Value Range 0–127, 255
Note
• If an empty string is set for "SDP_CODECx_y", "255" must be
set as the value for the corresponding
"SDP_PTYPEx_y".
Default Value 9 (for SDP_PTYPE0_1 to SDP_PTYPE0_8)
8 (for SDP_PTYPE1_1 to SDP_PTYPE1_8)
2 (for SDP_PTYPE2_1 to SDP_PTYPE2_8)
18 (for SDP_PTYPE3_1 to SDP_PTYPE3_8)
0 (for SDP_PTYPE4_1 to SDP_PTYPE4_8)
186 Administrator Guide Document Version 2013-02
4.6.1 Codec Settings