Web User Interface Reference Tone Frequencies (Page 121)
HOWLER_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of howler tones (i.e., alarm tones)
using
4 whole numbers (on 1, off 1, on 2, off 2) separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 100,100,100,100
Web User Interface Reference Tone Timings (Page 121)
HOWLER_START_TIME
Value Format Integer
Description Specifies the length of time, in seconds, that busy or reorder tones play
until they switch to howler tones.
Value Range 0–120 (0: Disable)
Default Value 30
Web User Interface Reference Start Time (Page 121)
BELL_CORE_PATTERN1_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 1, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces
" section 14,
using 2 whole numbers separated by a comma.
Value Range 0–5000 (0: Infinite time)
Default Value 2000,4000
BELL_CORE_PATTERN2_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 2, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces
" section 14,
using 4 whole numbers separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 800,400,800,4000
Document Version 2013-02 Administrator Guide 183
4.5.3 Tone Settings
To Next Page
Loading...
